[Из песочницы] Noolite MTRF-32 + Arduino + Domoticz03.04.2017 07:22

Исходный код

#if defined (ARDUINO) && ARDUINO >= 100
#include «Arduino.h»
#else
#include «WProgram.h»
#endif

#include

class ArduNoo {

byte chnl;
SoftwareSerial ns;

public:
ArduNoo (byte rx, byte tx, byte ch=0);
void on (byte ch=-1);
void off (byte ch=-1);
void onoff (byte ch=-1);
void bind (byte ch=-1);
void unbind (byte ch=-1);

bool command (byte channel, byte command);
};

#endif

ArduNoo: ArduNoo (byte rx, byte tx, byte ch): ns (rx, tx){
chnl=ch;
ns.begin (9600);
}

void ArduNoo: off (byte ch){
command (ch, 0);
}

void ArduNoo: on (byte ch){
command (ch, 2);
}

void ArduNoo: onoff (byte ch){
command (ch, 4);
}

void ArduNoo: unbind (byte ch){
command (ch, 9);
}

void ArduNoo: bind (byte ch){
command (ch, 15);
}

bool ArduNoo: command (byte chnl, byte command){
static byte i, r, buf[17]={171,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,172};
int sum = 0;

memset (buf+2,0,14); /* clear message body */
buf[4] = chnl;
buf[5] = command;

for (i = 0; i<15; ++i) {//10
sum+= buf[i];
}
buf[15] = lowByte (sum);//10
buf[16] = 172;//11

for (i=0; i<17; ++i){
ns.write (buf[i]);
}
//debug code
for (i=0; i<17;++i){
while (! ns.available ()) delay (10);
r=ns.read ();
Serial.print®;
}
Serial.println ();

return true;
}

#define RXpin 10
#define TXpin 11

ArduNoo noo (RXpin, TXpin);
String readString, chString;

void setup () {
Serial.begin (9600);
}

void loop () {
readString = »;
chString = »;
while (Serial.available ()) {
delay (3); //delay to allow buffer to fill
if (Serial.available () > 0) {
char c = Serial.read (); //gets one byte from serial buffer
readString += c; //makes the string readString
}
}
if (readString.length () > 1 && readString.length () < 4) { //we expect 1 letter and 1 or 2 digits (ch = 0-31)
for (int i = 1; i < readString.length(); i++) {
if (isDigit (readString[i])) {
chString.concat (readString[i]);
}
}
//Serial.println (readString[0]);
int ch = chString.toInt ();
switch (readString[0]) {
case 'n': //on
noo.on (ch);
break;
case 'f': //off
noo.off (ch);
break;
case 'x': // toggle
noo.onoff (ch);
break;
case 'b': //bind
noo.bind (ch);
break;
case 'u': //unbind
noo.unbind (ch);
break;
case 'y': //on all channels
for (int i = 0; i < 32; i++) {
noo.on (i);
delay (100);
}
break;
case 'z': //off all channels
for (int i = 0; i < 32; i++) {
noo.off (i);
delay (100);
}
break;
}
}
}

Copyright © 2014 Zhumatiy Sergey

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the «Software»), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED «AS IS», WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

namespace noo
{
class Program
{
static void Main (string[] args)
{
if (args.Length == 2)
{
SerialPort COM = new SerialPort (args[0]);
COM.Open ();
COM.WriteLine (args[1]);
COM.Close ();
}
}
}
}